Do you want to know why Nintendo Switch Won’t Turn On?
or do you want to get this fix? Then in this article, we will be
covering everything you should know about the issue and the methods to
fix this problem.
There is no denying that Nintendo Switch is one of the coolest gaming
consoles in the market. It is always a different feeling playing on
Switch by Nintendo because of the flexibility of the console.
One thing that does not change with every gaming console out there in
the market is that each and every gaming console can face some issues
over time while using them. In this article, we will be talking about
the “Nintendo Switch won’t Turn On” issue and also the ways that will help you fix it.
Reasons: Nintendo Switch Won’t Turn On?
If your Nintendo Switch won’t turn on, then there might be a few
reasons behind it. The most common of all is simply a low battery or a
power supply issue though it might be possible that there is an issue
with the operating system, software, or video game update of the
Nintendo Switch that may have caused the Nintendo console to stop working.
In most cases, there’s not a lot to worry about and you’ll soon be
able to turn your Nintendo Switch on and finally play your favorite
video games on your Nintendo Switch.
How to Fix the Nintendo Switch Won’t Turn On?
As the culprit behind “Nintendo Switch not turning on” is more than one, so are the possible ways to Turn On your Nintendo Switch console.
These few ways include checking the battery, checking the power
chord, seeing if the Switch is charging or not, checking the power
adapter, performing a hard reset, etc. All these methods are mentioned
below, it would a good thing if you have a read before initiating any
process.
Methods to Fix: Nintendo Switch Won't Turn On
Fix 1: Check the Battery Fix 2: Check Power Cord Fix 3: Plug it in to charge Fix 4: Perform a hard reset Fix 5: Check the power adapter Fix 6: Change Power Cord
Check the Battery
The first thing that you should do, if you are having the “Nintendo Switch won’t turn on”
issue is to check the batteries of your Nintendo Switch. If you feel
like there is an issue with the batteries and the batteries are the only
thing that is causing the issue, then you should replace them with
newer ones so that they do not cause you further problems.
Check Power Cord
It is possible that due to any reason, the power cord might get
damaged. So here you have to move further to check if there is any
problem with the chord like it is broken or torn. If you come across any
of these problems then you should replace the damaged cables with a new
ones. Also, if you have a loose connection, you should set it right.
Plug it in to charge
If the batteries of the Switch have been drained, it needs to
recharge again to get you out of this issue. If your console ran out of
power and you plug it in, you won’t get anything immediately, and waking
up, it will take some time (a few minutes maybe), but if your console
sat for weeks or months with no charge it could take several hours to
get even any kind of response out of it.
You should leave it on charge (keep regularly checking) for at least 1
to 2 hours, but keep it plugged in for longer if it still shows no signs
of life. If after a time period of 12 to 24 hours, you still get
nothing from trying to turn it on, you should try to hard reset it as
one last attempt to get things going.
Perform a hard reset
To perform a hard reset you should press and hold the power button
for about 12 to 15 seconds and after this release it. After a minute,
you should turn on your device and check whether you have fixed the
problem or not. If not, then move on to other steps.
Check the power adapter
The official power adapter is a pretty hard shell, but it’s not
impenetrable. First, you should check inside the USB-C plug for any bent
pins that might not be able to make any contact, inspect the cable for
shredding or wear out as this can cause a short circuit, and also make
sure there are no cracks on the side of the wall adapter.
If you see any signs of damage, do not use the adapter at all as it
could pose a danger. Replace it with another official adapter, and see
if using a new one solves your issue.
Change Power Cord
You should also go to check your power cord as it may be a cause of
concern. Sometimes when you use your console for a long time and do not
do any repair work, the power cords may get old and have wear and tear
issues with it. If you find something like this, you should change the
Power Cord and get a new one.
This course mainly covers work-flow of different circuits and
troubleshooting process of MacBook. Take this course and you will know
which circuit might be responsible for the issue you are dealing with
and master the troubleshooting process of each circuit.
Now the course
covers A1466/A1706/A1989, we'll update it continuously in the future.